Welcome to our websites!
QP-S66 Integrated intelligent static eliminator bar
Are you still worried about these electrostatic problems?
Let's say goodbye to the problems of printer caused by static electricity
Printer flying ink
Causing a short circuit in the circuit
The print pattern is not clear
QP-S66 static eliminator bar
The S.I.S. control system of QEEPO has the characteristics of super anti-interference and small ion level fluctuation range.
The self balancing SIS system monitors the external ion level in real time,
The stability of ion balance is 50% higher than that of traditional products
The speed of removing static electricity is 2.5 times higher than that of traditional products
The discharge electrode is made of tungsten, safe and durable
When disassembling the discharge electrode, use a tool or hold it by hand and rotate it counterclockwise to remove it
Directly input 24V DC power to work
Low power consumption, high energy, can quickly eliminate static electricity carried by objects
Line connection:
| Line color | input voltage |
| Red | +24VDC |
| Blue | -24VDC |
| Black | GND |
Note: the reliable grounding equipment must be guaranteed to work normally.
| TYPE | QP-S66 | ||
| input voltage | 24V DC | Working distance | 2~10cm |
| Input current | 1A | Recommended installation distance | 2~5cm |
| Rated power | 24W | Discharge electrode spacing | 25mm |
| Ion balance | ± | 70V| | Discharge electrode material | W |
| working frequency | 50 Hz | Discharge electrode replacement | yes |
| operation mode | Pulse AC | working temperature | 0~50℃ |
| Working humidity | 0 ~ 70% RH (no freezing, no condensation) | ||
| Test conditions: | Temperature (23 ± 3) ℃; Humidity (50 ± 5)%; Test voltage ± 1kV ~ ± 100V; | ||
Write your message here and send it to us
